TBM Brakes Rear Drag Brake Kit F3 Calipers (GM 10/12 Bolt Housing Ends 3.150 Bearing) 001-0222B3
TBM Brakes afford racers one of the lightest and highest performing brake setup on the market. These brakes have proven themselves in every realm from Top Fuel Dragsters to Hot Rod Drag Week and everything in between. TBM is quickly becoming the winning edge in brake system design. With a revolutionary design TBM Brakes has lower drag and friction than competitors. Lower rolling resistance means quicker ET and better overall performance as well as longer pad life.
Included in this kit:
- (2) F3 Calipers
- (2) 11.500"x.375 rotors
- (2) sets #1 compound low temp track pads (#85 compound aggressive brake compound pads available to order)
- (2) Caliper mounting brackets
- (2) Hats
- Mounting hardware kit
Rotor hat specs:
Bolt pattern: 5x4-1/2 and 5x4-3/4
Wheel stud size: 1/2" and 5/8"
Maximum inner hub diameter: 6.250"
Hub inner register diameter: 3.070"
*Please use red Loctite on all rotor bolts*
We recommend using TBM DOT 5.1 Extreme 6 Brake Fluid for all TBM Brake Kits. You'll need at least 4 (12 oz) bottles of fluid when building and plumbing a new system that is empty.
Please note: #85 compound pads need only be used in hard braking situations only. We do not recommend or suggest these for any situations where light braking or non extreme conditions are not present.
