94-04 Mustang SN-95 New Edge Lightweight Front Drag Racing Brakes 2 Piston (Reuses Factory Hub) 001-0224
Instructions: Click Here
Front Brake Lines: Click Here
TBM Brakes afford racers one of the lightest and highest performing brake setup on the market. These brakes have proven themselves in every realm from Top Fuel Dragsters to Hot Rod Drag Week and everything in between. TBM is quickly becoming the winning edge in brake system design. With a revolutionary design TBM Brakes has lower drag and friction than competitors. Lower rolling resistance means quicker ET and better overall performance as well as longer pad life.
This front brake kit for a 1994-04 Mustang New Edge GT/Cobra is for mounting to a stock disc brake style spindle.
Included in this kit:
For custom bolt pattern please contact us directly, otherwise OE factory bolt pattern will be issued.
TBM 2 Piston (F1/DR-1) Front Drag Racing Brake Kits are extremely lightweight and are not suitable for use with factory rear brakes/proportioning. They must be used with a properly installed aftermarket-style 4 piston rear brake kit.
Please use red Loctite on all rotor bolts
**Brake Lines NOT Included**
***Please note, when using aftermarket studs with this brake kit, if the shank protrudes past the face of the hub face, brake hat modification (hole enlargement) may be required or the hat will not sit flat causing the rotor to not be true.***
We recommend using TBM DOT 5.1 Extreme 6 Brake Fluid for all TBM Brake Kits. You'll need at least 4 (12 oz) bottles of fluid when building and plumbing a new system that is empty.
