Home > GM - Chevy > GM A-Body Chevelle > 1968 - 1972

9" Ford Complete Rearend GM A-Body 68-72

Part Number F9A7COMPLETE

4 Review(s)

9" Ford Complete Rearend GM A-Body 68-72

1968-1972 GM A-Body 9" Ford Complete Rear End Shown with Optional Drain and Fill

Write a Review

Price

Your Price:

$2,215.00

Choose Options

Build your 9" Ford Housing. If you have any questions, call 515-232-0126 and we will be happy to help!

Housing Center Piece

Housing Upgrades Drain and Fill Plugs w/ Jack Pad (+$55.00)
1/4" Heavy walled axle tube (recommended for 600+ horsepower or when welding will be done on tubes) (+$30.00)
Internal Gusseting (recommended for 800+ horsepower) (+$75.00)
Back Brace Installed (recommended for 800+ horsepower) (+$169.00)
Adjustable Lower Control Arm Brackets (+$30.00)

Upper Control Arm Bushings *Required

Powder Coating

Enter notes about custom housing width, suspension setup, etc. Enter notes about custom housing width, suspension setup, coilovers, etc.:

Build your Center Section. If you have any questions, call 515-232-0126 and we will be happy to help!

Axle Spline *Required

Center Section Upgrade (for 450+ HP)

Center Section Traction Device *Required

Gear Ratio *Required

Lube Locker Gasket

Build your Axle Shafts. If you have any questions, call 515-232-0126 and we will be happy to help!

Bolt Pattern *Required

Wheel Studs *Required

Choose your Brake Kit. If you have any questions, call 515-232-0126 and we will be happy to help!

Brake Kit *Required

Braided Steel Brake Lines

Universal Parking Brake Cable Kit

Quantity

Add to Wish List

Description

Fits: 1968-1972 Chevelle, Monte Carlo, Malibu, El Camino, Skylark, GS, Lemans, GTO, Cutlass, 442

Base Package Includes:

9" AXLE HOUSING

New Big Web Housing Center Piece
New 3" Outside Diameter D.O.M. 3/16" Walled Axle Tube
New CNC Laser Cut Brackets Jig Welded for Factory Fitment
New Housing Studs, T-Bolts, and Housing Vent Required for Assembly are Included
Built to Stock Width or Custom Specified Width

9" AXLES

New Axle Shafts in your Choice of Spline
Axle Bearings and Wheel Studs Installed
Choice of Bolt Pattern
Choice of Wheel Studs

9" CENTER SECTION / THIRD MEMBER

New Stock Case, Pinion Support & 1330 Short-Wide Yoke
New Ford Motorsports Clutch Style Trac-Loc Posi Unit
New Motive Performance Ring & Pinion
New Timken USA Bearings
New Solid Spacer
Fully Assembled, Ready to Bolt in

9" DRUM BRAKES

New Backing Plates
New 11" Drums
New Shoes
New Internal Hardware
Fully Assembled, Ready to Install

Custom widths can be accommodated. If desired, please specify overall width (wheel mounting surface to wheel mounting surface) as an additional comment during the checkout process.

Each Quick Performance 9" rear end package is built to order to your exact specifications. Lead times will fluctuate throughout the year. If you have a specific need or delivery date, please reach out so we can do our best to accommodate.

Complete rear ends do not come assembled and will ship as four separate packages. The housing, assembled center section, axles, and brakes will ship separately and at different times as the items are completed.

Many options and upgrades are available. Pricing is for Base Package.

Customer Reviews

	9" Ford Complete Rearend GM A-Body 68-72
	I'm restoring a 1972 Monte Carlo and decided I wanted to go with a Ford 9 inch set up. This package was everything I was looking for. Assembly and install was easy.
	Did you find this helpful? 135 of 144 Found Helpful Reviewed by: Darius Harris from Dale, Wi. - 12/21/2015 5/5

	70 chevelle
	I bought this 9 inch assembly and found everything was just as described. It bolted in without any fitment issues at all. After the break in period I have thrown a ton at this diff and found it will handle whatever i have to throw at it. The best part is the price is half of what other charge.
	Did you find this helpful? 66 of 71 Found Helpful Reviewed by: Justin from Mentone. - 4/22/2019 5/5

	Great price and good tech support.
	I bought this package for my 1968 cutlass along with a few upgrades. 1st time assembling a rear end but QP was extremely helpful with questions. Call them for quick answers don't email. Everything was quality and came together easier than I expected. I saved at least $1000 doing it myself. Now I have a rear end that handles my 400 horse 455!
	Did you find this helpful? 12 of 13 Found Helpful Reviewed by: Dave B from Illinois. - 12/8/2017 5/5

	Absolute best option.
	It was professionally installed in the car. The shop that did it has done rebuilds and custom installs of various rear ends in random old school for me. I was told this was the easiest bolt in option they had ever done. Everything is great quality. The brake kit uses common and easily acquired parts. The optional drain and fill plugs make life better.
	Did you find this helpful? 8 of 10 Found Helpful Reviewed by: (Verified Buyer)* Scott Allen from South Dakota. - 2/20/2022* 5/5