2015-2023 Dodge Challenger Hellcat Rear Drag Racing Brake Kit (Reusing Factory Hubs) - 001-0309-1

2015-2023 Dodge Challenger Hellcat Rear Drag Racing Brake Kit (Reusing Factory Hubs) - 001-0309-1

Install Instructions

Brake Lines: Click Here

Note: This brake kit allows for use of 15" wheels

Saves 66+lbs savings per kit.

Note: As of 4/21/25 we moved the rear brake kits to our .500 thick top fuel rotors

Weight: 20lbs Total

Includes:

• (2) F3 4 Piston Calipers  002-0192SSP-1 / 002-0192SSP-2
• (2) Billet Aluminum Rotor Hats
• (2) 11.50x.500 Revolution Rotors  3-1150500
• (2) Mounting Brackets
• Full Set #1 Compound Standard Brake Pads  6-0102W 
• Hardware Kit
• 
  

Caliper has <  .180 inch overhang over the wheel mounting surface, for best in class wheel clearance. 

These clear most 15" drag wheels w/ or w/out beadlock rings.

Note: This Kit retains usage of factory ABS functionality, however, we do not recommend utilizing ABS braking functionality with racing brakes as it may cause unpredictable or negative effects on braking performance that can cause inadequate braking and premature pad/rotor wear. 

⚠ WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov

We recommend using TBM DOT 5.1 Extreme 6 Brake Fluid for all TBM Brake Kits. You'll need at least 4 (12 oz) bottles of fluid when building and plumbing a new system that is empty. 

*Please use red loctite on all rotor bolts*