1999-18 Silverado Medium Duty 4 piston Drag Racing Front Brake Kit (Reusing Factory 6x5.5 Hubs) 001-0290-1
Medium Duty Drag Racing brake kits are the latest release from TBM brakes in its drag racing line. These brakes are the perfect balance of lightweight brakes with incredible stopping power that are up to the task of stopping heavier cars as well as high demand/high heat applications such as stock/super stock and bracket racing vehicles that do not tend to use a parachute and utilize the brakes more than a typical heads up car or vehicle that uses the parachute every pass. Thanks to a 1/2" thick Revolution rotor and F3 4 piston no drag technology caliper, these brakes are up to the task for the most extreme uses in drag racing!
Instructions - CLICK HERE
Brake Lines: 99-06 Click Here / 07-19 & 21-24 Click Here
TBM Brakes Medium Duty 4 piston Silverado / Sierra drag racing brakes are designed to deliver ultimate stopping power combined with huge weight savings and durability. Thanks to unmatched F3 4 piston caliper stopping power and a 12" revolution rotor, you will have equal or increased stopping power compared to your factory brakes without carrying the weight.
Note: This Kit Reuses Factory Hubs
Note: These only work with 17" or larger wheels
This kit fits the following:
- 1999-2018 Chevy Silverado 2WD / 4WD
- 1999-2018 GMC Sierra 2WD / 4WD
Weight: 12.5lbs per side or 25 lbs overall. This kit saves 60 lbs over factory disc brakes (both sides).
Kit includes:
⚠ WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
Installation of this kit will require 3AN lines that are sold separately
We recommend using TBM DOT 5.1 Extreme 6 Brake Fluid for all TBM Brake Kits. You'll need at least 4 (12 oz) bottles of fluid when building and plumbing a new system that is empty.
*Please use red Loctite on all rotor bolts*
